Noise During Operation of the Aria Stove

To identify the cause of any abnormal noises during the operation of the Aria stove, it is recommended to carefully follow the steps below:

1. Perform the output test
   Access the system menu, select the Output Test option, and run the test on all components to identify any component that may be causing the noise.

   Note: the output test must be performed with the stove in the OFF state.

2. Check during operation
   If no anomalies are detected during the output test, turn on the stove and verify that the noise is not caused by installation issues, such as the chimney or air intake.

3. Check for thermal expansion
   Check if the noise is generated by the thermal expansion of certain components (for example, the glow plug).

4. Auger inspection
   Verify that there are no foreign objects in the auger that could cause abnormal noises.

5. Check pellet quality
   Ensure that the pellet used is of appropriate length and robustness to avoid malfunctions and abnormal noises.