Using and Updating the KeyPro

The KeyPro is the tool used to program the control unit of Aqua stoves.

Below are the steps to program the control unit:

1 - Disconnect power from the stove or the control unit.

2 - Connect the supplied cable to the RS232 port of the KeyPro and directly to the control unit/VGA port of the stove.

3 - Select the firmware on the KeyPro.

4 - Press "START" and then "BATTERY".

5 - At the end of the loading, press "DONE".

The firmware to load into the KeyPro can be downloaded by entering the reserved area of the MorettiDesign website (https://morettidesign.it/en/area-riservata-accesso/) by accessing the "area riservata boutique/cat" section using the following credentials:

• Username: moretti-design-en
• Password: boutique-cat-en

Inside the reserved area, in the "PROGRAMS" section, by downloading the file "MORETTI AQUA-ARIA Tiemme", you will have all the Tiemme firmware. 
n the "VIDEOS" section, you will find tutorial videos on how to use and update the KeyPro.