NAVEL INSIDE – Air Stoves

In Moretti Design air stoves, the WiFi module integrated into the emergency display “NAVEL INSIDE” allows the generator to connect to the Moretti Design APP.

The product packaging includes the identification codes necessary for configuration:

• MAC Address
• REG CODE

These unique codes are essential for pairing the device with the APP.

Missing MAC and REG CODE

If the end user or the installation technician does not have the MAC and REG CODE, proceed as follows:

1. Power on the device and verify that the WiFi module is active.
2. The device will automatically generate a WiFi network with an SSID in the following format:

T009_XXXX

1. Identify the full SSID displayed among the available networks.
2. Send an email to technical support ( supportoclienti@morettidesign.it ) indicating:
   • Full SSID detected
   • Stove model
   • Serial number, if available

Technical support will provide the necessary REG CODE to complete the configuration through the APP.

If the Moretti Design product equipped with the Navel Inside device shows no Wi-Fi signal from the T009_XXXX module, it is recommended to update the stove to the latest available firmware version.

The firmware can be downloaded from the Reserved Area on the website.