Code Change - Aria Stove

Aria Stove

For the Aria stoves by Moretti Design, the procedure to change the remote control code is as follows:

1 - Disconnect the electrical power (0/1) behind the stove.

2 - On the remote control, press and hold the "OK" button and the power button simultaneously.

3 - Press the "down arrow" button, select "New," and confirm with "OK."

4 - Choose a new code.

5 - Press "OK" and reconnect the electrical power to the stove.

 

Note in case of failure to connect between remote control and control unit

If the remote control does not connect to the control unit, first check that the emergency display is functioning correctly and that not all LEDs are lit continuously.
If all the LED lights are on and steady, it is possible that one or more stove components are short-circuited and preventing the display from working properly.

To perform a check:

• disconnect all components connected to the control unit,

• leave only the power supply and the flat cable of the emergency display connected,

• check if the emergency display resumes functioning correctly.

This procedure allows you to identify any components causing a short circuit.