Customer Service Moretti Design

The pressure switch must be connected to the silicone tube via the P1 connection, which is the external one. The electrical connection must be made on contacts 1 and 2, also indicated in the techni...

The pressure switch must be connected to the silicone tube via the P1 fitting, which is the external one.The electrical connection must be made on contacts 1 and 2, as indicated in the technical ma...

Is it possible to install a quartz igniter on a stove that originally had an iron igniter?Yes, it is possible, just modify under the section “TIMES” the PARAMETER T02: from 10 [s] to 5 [s].Always p...

Is it possible to install a quartz glow plug on a heater that originally used an iron glow plug? Yes, it is possible, you just need to modify under the section “FACTORY SETTINGS“ the PARAMETER 34: ...

For control unit PSYSL01000263 (“MB250”), the communication between the APP and the remote control is not synchronized, so it is not possible to use both devices simultaneously to manage the chrono...

It is possible to extend the NTC 10K probe using a cable with a cross-section of 0.5 mm², for a recommended maximum length of 8 – 10 meters.It is important to keep the joints well insulated and, if...

You are invited to use the Xpare portal (https://www.morettidesign.xpare.it/index.php) in order to identify the correct component installed on the stove or boiler, by consulting the associated seri...

Is it possible to install a WiFi thermostat for ducting management?It is possible to install a WiFi thermostat to control the ducting, provided that it is equipped with a dry contact (zero-potentia...

To configure the stove via the external WiFi module 4HEAT, you must first download the 4HEAT application on your device, register your credentials, and wait for the confirmation email. Then launch ...

For control units model PSYSL01000263, when the message "SOND" appears on the remote control, it is recommended to refer to the technical manual.It should be noted that this is not an error message...